What are the indicators that affect the insulator?

- May 25, 2017 -

1, the insulation resistance and resistivity resistance is the reciprocal of the conductance, the resistivity is the resistance per unit volume. The smaller the conductivity of the material, the greater the resistance, the reciprocal relationship between the two, for the insulation material, always want the resistivity as high as possible.

2, the relative dielectric constant and dielectric loss tangent Insulation material uses two: the electrical network components of the mutual insulation and capacitor media (energy storage). The former requires a relatively small relative dielectric constant, which requires a relatively large relative dielectric constant, and both require dielectric loss tangent, especially in high frequency and high voltage applications of insulating materials, in order to make dielectric loss is small, are required to use Dielectric loss tangent small insulation material.

3, breakdown voltage and electrical strength in a strong electric field under the destruction of insulating materials, loss of insulation into a conductive state, known as the breakdown. The breakdown voltage is called the breakdown voltage (dielectric strength). Electrical strength is the breakdown of the voltage between the voltage and the two electrodes that withstand the external voltage under the specified conditions, that is, the breakdown voltage per unit thickness. For insulating materials, the general breakdown voltage, electrical strength, the value of the better.

4, the tensile strength is in the tensile test, the sample to withstand the maximum tensile stress. It is the most widely used and tested test of the mechanical properties of insulating materials.

 5, resistance to burning refers to the insulation material in contact with the flame to resist combustion or leave the flame to prevent the ability to continue burning. With the increasing use of insulating materials, its flammability requirements are more important, people through various means to improve and improve the flame resistance of insulating materials. The higher the flame resistance, the better the safety.

6, arc resistance in the specified test conditions, the insulation material to withstand the role of the arc along the surface of the ability. Test the use of high voltage AC current, by high pressure between the two electrodes generated by the arc, so that the surface of the insulating material to form the conductive layer of the time required to determine the arc resistance of insulating materials. The greater the time value, the better the arc resistance.

7, the degree of sealing on the oil, water quality isolation is better.

Previous:Transformers are usually used in the following three kinds of insulating paper Next:The role and use of insulating paper